PTFE-Coated Open Mesh Fiberglass Fabrics
PTFE-coated fiberglass open mesh fabrics are engineered for applications demanding heat resistance, non-stick release and controlled airflow. The open weave structure allows efficient drying, curing and heat transfer while the PTFE coating prevents material adhesion.
PTFE fiberglass mesh combines the structural integrity of woven fiberglass with a PTFE coating that provides a completely non-stick surface. The open weave structure allows air, moisture and gases to pass through freely.
These fabrics are designed for continuous use in high-temperature environments where conventional materials would degrade. They offer exceptional durability with typical service life measured in thousands of operating hours.
| Base Material | Woven fiberglass, open mesh |
| Coating | PTFE (Polytetrafluoroethylene) |
| Temperature Range | -73°C to +260°C |
| Thickness | 0.5 – 1.0 mm (mesh dependent) |
| Weight | 0.6 – 1.25 lbs/sq yd |
| Tensile Strength | 200 – 600 lbf/in |
| FDA Compliance | 21 CFR 177.1150 |
| Available Widths | Up to 4,800 mm |
PTFE fiberglass mesh is the standard solution for industrial applications that require airflow, heat resistance and a non-stick surface.
Continuous drying of food, textiles, paper and industrial products.
Oven conveyor belts and baking sheets for commercial food production.
Drying and curing of coated and dyed fabrics in stenter frames.
Flash cure and tunnel dryer conveyor belts for screen printed textiles.
Release mesh for vacuum bagging and autoclave curing of composites.
Heat shrink tunnel conveyor belts with optimal airflow.
We supply PTFE fiberglass mesh as conveyor belts, sheets and custom-cut pieces.
Get a quote for mesh belts, sheets or custom-cut PTFE fiberglass fabrics.